-
13
-
4.8 Attaching the second wooden
cheek
4.9 Fastening the round nuts
Take the second wooden cheek.
The side of this wooden cheek that
is marked with a colour sticker must
lie on the side of the second stain-
less-steel plate that is marked with a
colour sticker.
Hold the second wooden cheek in
such a way that the side marked
with the sticker points down.
Place the wooden cheek onto the
stainless-steel plate, passing the
threaded rods through it. The side
of the second wooden cheek that is
marked with the colour sticker now
lies on the side of the second stain-
less-steel plate that is marked with a
colour sticker.
Attach the three remaining round nuts
to the three threaded rods in the holes
of the second wooden cheek. To do so,
you can use the enclosed Allen™ key.
Finally, tighten all six round nuts. Done.
The height-adjustment mechanism for
your TRAUMSCHWINGER, is ready.
SAFETY INFORMATION
The round nuts can gradually loosen over time. Regularly make sure that the
round nuts are tightly fastened, and tighten them with the enclosed Allen™
key whenever necessary. If the round nuts loosen, this could result in abra-
sion of the metal parts and soiling of the ropes.
Summary of Contents for BABYSCHWINGER
Page 1: ... 1 your manual ...
