background image

 

5

 

 -

                                           SAFETY NOTICE

Our TRAUMSCHWINGER - hanging chairs are resting as well as relaxing 

furniture. They are not to be used as trainers and/or play area. If you notice 

damage of the material (e.g. cracks), the product should not be used any-

more. When an infant or toddler is placed in the nettling, a cloth should be 

placed underneath him. Children should not be allowed unsupervised the 

use of the furniture. Carefully observe further notice and safety instructions 

in this manual, and keep them for possible questions. 

Follow exactly the instructions in order to avoid  causing dangers due to 

incorrect installation. The mounting should be carried out by an adult. 

Suspension and height adjustment are to be  checked regularely for tight-

ness.

In all one-dot-suspension a swivel or similar needs to be used in order to 

avoid shear stresses on the suspension. Our stainless steel hangers with 

integrated plain or ball bearing make the use of an additional rotating vortex 

unnecessary.

For your TRAUMSCHWINGER you need your building conditions and use wishes 

adequately secured. You can receive the standard fixing for our products directly 

through MIRA - ART we would be pleased to advise you. 

Basically, you have the choice between a ceiling mounting, attachment to a beam 

or the use of a stator. Pay attention of the respective weight if you are purchase 

the attachment for the TRAUMSCHWINGER. Make sure when you chose ceiling 

mounting, that your requirement for your ceiling (e.g. concrete) is met. Inquire at 

a local hardware store, what kind of attachment you are suppose to use for your 

structural circumstances.

2 Prerequisites

Summary of Contents for BABYSCHWINGER

































Reviews: