-
12
-
4.6 Placing the wooden wedge on
the stainless-steel plate
4.7 Attaching the second stain-
less-steel plate
Put the wooden wedge with the
inserted steel pin on the previously
assembled stainless-steel plate with
one of its two smooth sides. Position
the wooden wedge in such a way
that the protruding steel pin is in the
groove of the stainless-steel plate.
Take the second stainless-steel
plate. Hold the stainless-steel plate
in such a way that the side marked
with the sticker points up. Place
the stainless-steel plate onto the
stainless-steel bushes, passing the
threaded rods through it. Make sure
that the steel pin in the wooden
wedge is also inserted in the groove
of this second stainless-steel plate.
SAFETY INFORMATION
The sides of the wooden cheek and of the stainless-steel plate that are
marked with colour stickers must face each other.
This ensures that the ropes will only touch the rounded edge of the stain-
less-steel plate. Non-compliance with these assembly instructions can result
in increased wear and tear of the ropes.
Summary of Contents for BABYSCHWINGER
Page 1: ... 1 your manual ...
