-
9
-
4
Assembling the height-adjustment mechanism
The assembly of the included height-adjustment mechanism is the first stage of
the assembly of your TRAUMSCHWINGER. For this, you need the parts from the
height-adjustment mechanism box and the carabiner. The required tool (Allen™
key) is included. The easiest way to assemble the height-adjustment mechanism
is to do so while sitting at a table.
4.1 Preparing the threaded rods
Some metal parts have been pre-as-
sembled (for the purposes of checking
the thread). For the assembly, you
first need to disassemble these parts.
Take the three pre-assembled thread-
ed rods, remove one of the round
nuts on each of the rods, and remove
the stainless-steel bushes from the
threaded rod. Slightly tighten the
round nut remaining on the threaded
rod. You now have three threaded
rods with one attached round nut
each.
4.2 Inserting the threaded rods (1)
Now take one of the triangular wooden
cheeks. One side of the wooden cheek
is marked with a colour sticker; this is
the inner side of the respective wooden
cheek.
Hold the wooden cheek in such a way
that the side marked with the sticker
points down. With the other hand,
insert a threaded rod with a round nut
through each of the holes.
Summary of Contents for BABYSCHWINGER
Page 1: ... 1 your manual ...