ENGLISH
78
www.trapp.com.br
Installation
Assembling output device
Fit output device (1) on shredder cover (2), position
and tighten with butterfly nut (3) and hex-nut (4).
1
2
3
4
13
Attaching to tractor
Carefully read Operator's Manual, tractor
and
cardan instructions manuals. Shredder TR-600T
has been manufactured to be coupled to a tractor
equipped with a hydraulic lift of three universal
connecting points, as shown below.
Before connecting the equipment to the
tractor, place both on flat ground and make
sure nobody stands between them.
Slowly approach shredder to the lift arms.
First, connect the lower arms and then the
upper arm. The shredder is equipped with
category I securing pins.
Make sure pins are secured to the
corresponding safety lock.
Block lift arms with respective chain or anti-
vibration stretchers.
After that, make sure all machine screws and
nuts are properly tightened (see table “Torque
Specifications”).
Pay attention to tractor front wheels. When
shredder is lifted, and the wheels seem to light,
place ballast on the front part of the tractor.
1
2
3
4
13
