14
TR-WMX-3.5 Betriebsanleitung für Teilnehmergeräte
Tabelle 1-2. Stiftbelegungen für den TR-WMX-3.5 10/100 Ethernet-Anschluss
Stift
Signal
Standard-Drahtfarbe
1 Tx+
Weiß/Orange
2
Tx-
Orange
3 Rx+
Weiß/Grün
4
PoE V+
Blau
5 PoE
V+
Weiß/Blau
6
Rx-
Grün
7 Gnd
Weiß/Braun
8
Gnd
Braun
1.5 Configuring the TR-WMX-3.5
After installing the TR-WMX-3.5, use the procedures in the following sections to
configure it using its Configurator.
1.5.1 Logging in to the Configurator
Your TR-WMX-3.5 provides a Web-based Configurator for performing advanced
configuration activities. After you install your TR-WMX-3.5, use the following procedure
to launch the Configurator.
1.
Use an Ethernet cable to connect the Ethernet port on the PoE to a network-
interface card (NIC) in a PC or network hub.
The TR-WMX-3.5 Ethernet port is equipped with an auto-sensing Ethernet port
that allows both regular and cross-over cables to be used.
2.
Start your Web browser and point it to one of the following default IP addresses:
http://192.168.101.151
or
http://192.168.0.1
. The Login page in Figure
1-8 appears, with your cursor in the User name field.
The default IP address is the same for all TR-WMX units. Therefore, do not