Page 21
Rev. 2.0
CineMonitor
HD
Dec 1
st
2008
INPUT
Selects the input.
At selection, the format of the video is displayed
When no signal is available, displays “NO SYNC”
F1…F4
Selection of active inputs (Input board dependant)
CineMonitorHD6
F1:
SDI (HD/SD)
F2:
ACCessory (YPrPb or RGB or CVBS selected in
TECHNICAL/ACCESSORY menu)
CineMonitorHD8/12/15
F1:
SDI (HD/SD)
F2:
CVBS
F3:
ACCessory (YPrPb or RGB or CVBS selected in
TECHNICAL/ACCESSORY menu)
CineMonitorHD6/8 option “SDI only”
F1:
SDI 1
F2:
SDI 2
Pressing F1…F4 activates or not the selected input. An active input
appears in orange, an inactive in white. An inactivated input cannot be
selected by the “INPUT SEL”.
Inactivating the accessory input reduce the power consumption of the
CineMonitorHD of about 4 Watts.
The format of the ACCessory can be configured in the TECHNICAL
MENU. It is possible to select between component YPrPb, component
RGB and CVBS.
