Page 15
Rev. 2.0
CineMonitor
HD
Dec 1
st
2008
Operation
Start-Up & Power
The ON/OFF Switch is placed on the back of the monitor.
The product needs a certain time to reach its nominal brightness.
This time can vary with the temperature.
When using the optional Battery Holder, the switch of the battery holder
overpasses the switch of the monitor.
In OFF position, the power consumption is null.
WARNING RISK OF FIRE: It is always recommended to remove the
power source from the monitor when you do not use it and/or when you
travel. Especially if you place the monitor in a closed environment (bag,
box, …)
Using the direct access functions
Several direct functions are available from the keypad.
One short press on the pad allows access to the functionalities.
One long press (more than 2 seconds) on the pad allows access to the
optional functionalities for the related function (if any).
The blue knob is a rotary encoder with a push function, it is used to
access and navigate in the menus, adjust some parameter values,
validate and exit functions by pushing it.
A short push when on “EXIT” exits of the current menu to the previous
level (if any) a long push exits from the menu.
F1…F4
One long press (more than 2 seconds) on the direct function pad allows
to access to the optional functionalities for the related function (if any).
Depending of the function, options and environment, the content of F1 …
F4 can vary. Pressing the pad just under the engraving will activate or
