Page 23
Rev. 2.0
CineMonitor
HD
Dec 1
st
2008
MENU FUNCTIONS
ADJUSTMENTS
HUE (TINT)
Adjustment of the color phase.
This adjustment is only usable in NTSC when the monitor is equipped
with a CVBS analog input.
Values from -90° to +90° each step 1°
BRIGHTNESS
Setup the black level of the signal from -174mV to +174mV from the
nominal position.
CONTRAST
Setup the gain of the video signal (Black to White level) from –100% to
+100% around of the nominal position.
SATURATION
Setup the color saturation of the signal from -100% to +100% around of
the nominal position.
BLUE CHECK
Sets the monitor in BLUE ONLY mode.
This mode is used to calibrate the monitor with an incident color bar.
COLORIMETRY
MANUAL
Allows the manual adjustment of RGB gain (from 0 to 2, nominal 1.00)
and offset of the black (-127mV to + 126mV, nominal 0 mV).
The nominal value in manual mode correspond to the D65 setup.
