Page 37
Rev. 2.0
CineMonitor
HD
Dec 1
st
2008
Service & Maintenance
General
Please read carefully the chapter « TRANSVIDEO Equipment Limited Warranty »
about the warranty given by TRANSVIDEO S.A. on the equipment described in
this manual.
For repairs after the warranty period, you can refer to your local TRANVIDEO
Distributor/retailer or use the following procedure.
Useful tips
CLEANING
The painting of the CineMonitorHD is resistant to general cleaners and solvents.
Do not use abrasive products to clean the CineMonitorHD.
The front glass is a high quality optical part. A metallic multi-layers vacuum
deposit makes the anti-reflection coating. Do not use abrasive or acid cleaners.
The microfiber cloth delivered with the CineMonitorHD is strongly recommended
to clean the glass. Remove dust and particles of the glass before using the cloth.
No liquid is normally necessary. If there is some dirt on the screen, it is possible
to remove it with clean warm water.
The microfiber cloth collects grease particle in its structure. It is necessary to
wash it when necessary with water and soap.
The microfiber cloth is orderable as spare part (see accessories)
FULL RESET
In case of need, it is possible to fully reset the CineMonitorHD.
Connect the monitor to a power source
Switch off the monitor with the power switch on the back
Press the “adjust” pad
Switch on the monitor keeping pressed the “adjust” pad until the display shows
“FULL RESET”
This procedure totally erases all user setup in the memories.
