Transtherm Caves 10668, User Manual

Page: 15 / 34

14
GB
15
GB
Possible incidents Causes Corrective actions
The pictogram is displaying
The temperature
has not returned to
within the ±4°C / 39°F
threshold Check that the door is correctly closed.
Check the condition of the door seal.
If you placed a large amount of bottles in your cabinet in the last few hours,
wait a while then check again. If the alarm is still displaying, contact your
Transtherm retailer.
The pictogram is still displaying
even though I have taken the corrective
actions above
Operating fault Unplug the cabinet and contact your Transtherm retailer.
The pictogram is displaying
Open door alarm Make sure that the door is correctly closed.
The pictogram is flashing
The level of relative
humidity has been <
50 % for over 72 hrs • Pour a glass of water into the duct of the tray (see chapter 7, § IV).
• In order to know how often to add water, count the number of days
separating the 1st day you added water and the day when the pictogram was
displayed
After a few hours, the pictogram will disappear.
The pictogram is displaying
Temperature sensor
fault alarm Contact your Transtherm retailer.
If your appliance does not seem to be working correctly,
contact your Transtherm retailer.
8 - o
perAting FAults
9 - e
nergy AnD technicAl FeAtures
Maintenance operations to be carried out approximately once a year
•
Unplug and unload the appliance.
•
Clean the water drain at the bottom of the wine cabinet. Pay attention that nothing is blocking this drain.
•
Regularly vacuum the condenser at the back of the appliance.
•
Clean the inside of the compartments with water and a gentle cleaning product.
•
Rinse thoroughly and dry it with a soft rag.
•
Check that the seals are in good condition. It is often necessary to clean the door seal. Using unsuitable cleaning products can cause premature ageing of
the seals. Certain rules must therefore be followed: whenever you clean the seal, always rinse off any cleaning product with clear water. All traces of cleaning
product must be removed from the seal. Transtherm only recommends using a mild soapy solution. If this proves insufficient, it is possible to occasionally
use an ethanol-based solution, provided that the concentration used is less than 10% and that the seal is then rinsed thoroughly with clear water.
Your Transtherm cabinet is a tried and tested appliance.
Regular monitoring of your
cabinet and reporting any faults
to your retailer will ensur
e
that your appliance provides
you with many years of faithful
service.
7 - e
veryDAy mAintenAnce
Prestige
Reference Height
1
Width Depth
2
Weight when empty Recommended temperature range
mm mm mm kg T° mini (°C / °F) - T° maxi (°C / °F)
1 température
Loft Vintage Glass door LOXXPV3 960 680 690 57 0 / 32 30 / 86
Loft Vintage Full Glass door LOXXPV3 960 680 690 58,5 0 / 32 30 / 86
Manoir porte Glass door MA1TMV3 1479 680 690 78 0 / 32 30 / 86
Manoir porte Full Glass door MA1TMV3 1479 680 690 80 0 / 32 30 / 86
Manoir porte solid door MA1TMV3 1479 680 695 63 0 / 32 30 / 86
Ermitage porte glass door ER1TGV3 1825 680 690 88 0 / 32 30 / 86
Ermitage porte Full Glass door ER1TGV3 1825 680 690 90,5 0 / 32 30 / 86
Ermitage porte solid door ER1TGV3 1825 680 695 73 0 / 32 30 / 86
3-temperatures
Castel porte glass door CA3TGV3 1825 680 690 96 12 / 54 30 / 86
Castel porte Full Glass door CA3TGV3 1825 680 690 98,5 12 / 54 30 / 86
Castel porte solid door CA3TGV3 1825 680 695 81 12 / 54 30 / 86
Multi-temperatures
Réserve porte glass door REMTGV3 1825 680 690 88 12 / 54 30 / 86
Réserve porte Full Glass door REMTGV3 1825 680 690 90,5 12 / 54 30 / 86
Réserve porte solid door REMTGV3 1825 680 695 73 12 / 54 30 / 86
Control accuracy: +/- 1°C (2°F), display accuracy: +/- 1°C (2°F).
1- Height including the top hinges and the feet, adjusted to mid-height.
2- Depth including a gap of 29 mm at the back of the cabinet for ventilation.
According to delegated regulation (EU) 2019/2016 of the European Commission, access energy data about our appliances on the EPREL database by scanning the
QR code visible on your appliance’s energy label.
Minimum duration of guarantee offered by the manufacturer: 2 years parts.
Minimum duration of guarantee offered by the manufacturer: 2 years parts.