9
8
BEFORE YOU START
INTRODUCTION
Monitor Components
List
1.Blood Pressure Monitor
(TMB-1872-B)
4.User manual
3. 4*AAA batteries
2.Cuff
(Type BF applied part)
(22~32cm or 22~42cm)
Component list of
pressure measuring system
1 Cuff
2 Air pipe
3 PCBA
4 Pump
5 Valve
BATTERY COMPARTMENT
The Choice of Power Supply
In order to get the best effect and protect your monitor,please use the right
battery and special power adaptor which complies with local safety standard.
•
Slide off the battery cover.
•
Install the batteries by matching
the correct polarity, as shown.
•
Replace the battery cover.
1
.Battery powered mode:
6VDC 4*AAA batteries
2
.
Installing and Replacing the Batteries
CAUTION
CAUTION
Replace the batteries whenever the below happens
The shows
The display is dim
The display does not light up
Do not use new and used batteries together.
Do not use different types of batteries together.
Do not dispose the batteries in fire. Batteries may explode or leak.
Remove batteries if the device is not likely to be used for some time.
Worn batteries are harmful to the environment. Do not dispose with daily garbage.
Remove the old batteries from the device following your local recycling guidelines.
5.USB Cable and AC Adaptor
MEM BUTTON
START/STOP BUTTON
SET BUTTON
CUFF
AIR HOSE
LCD DISPLAY
AIR CONNECTOR PLUG
Please use the AC adaptor and USB
cable just like the following picture:
AC adaptor
AC adaptor powered mode:
5V 1A
USB INTERFACE
(BLJ06L050100U-U)
