19
18
DATA MANAGEMENT
Recall the Records
1
. When the monitor is off,
please press “MEM” button
to show the recent record.
If the records are less than
3 groups, it will display the
latest record instead.
( Take user 1 for example.)
2
. Press “MEM” button
or “SET” button to get
the record you want.
The most recent record (1) is shown first. Each new measurement is
assigned to the first (1) record. All other records are pushed back one
digit (e.g., 2 becomes 3, and so on), and the last record (60) is dropped
from the list.
The corresponding
time is 10:38.
The corresponding
date is 2019 year
July 1st.
CAUTION
The date and time
of the record
will be shown
alternately.
The current No. is No. 1.
three records in total.
If you did not get the correct measurement, you can delete
results by following steps below.
Delete the Records
A: Delete one record
1.Hold pressing “set” button
for 3 seconds when the
monitor is in the memory
recall mode, the flash
display “dEL one+User
ID” will show.
2.Press and hold “Start/stop”
button to confirm deleting
and the monitor will display
“dEL donE+USER ID” and then
turn off.
Note: To exit out the delete mode
press “Start/Stop” button shortly .
START
STOP
DATA MANAGEMENT
