Publication date: Mar. 2016
33600 Rev B
92
5. Maintenance
5-1. Resolving No Link Condition
The possible causes for a no link LED status are:
The attached device is not powered on
The cable may not be the correct type or is faulty
The installed building premise cable is faulty
The port may be faulty
5-2. Q&A
1.
Computer A can connect to Computer B, but cannot connect to Computer C
through the SM24TAT4GPA.
The network device of Computer C may fail to work. Please check the
link/act status of Computer C on the LED indicator. Try another network
device on this connection.
The network configuration of Computer C may be something wrong. Please
verify the network configuration on Computer C.
2. The uplink connection function fails to work.
The connection ports on another must be connection ports. Please check if
connection ports are used on that SM24TAT4GPA.
Please check the uplink setup of the SM24TAT4GPA to verify the uplink
function is enabled.
3. The console interface cannot appear on the console port connection.
SM24TAT4GPA has no console port, so you cannot use console interface to
connect with SM24TAT4GPA.
4. How to configure the SM24TAT4GPA.
User can use IE browser program in window series of computer to control
the web smart functions in SM24TAT4GPA. First, choose any port in
SM24TAT4GPA. Then, use IE and type default IP address, 192.168.1.1, to
connect to 24 Gigabit with RJ45 network line. Finally, the login screen will
appear at once.
