Publication date: Mar. 2016
33600 Rev B
57
Parameter description:
PoE Enabled:
To evoke to enable which port supply the power to the PD.
Priority:
Three options are offered for the user to choose, including Normal, Low
and High. Default is Normal. The switch will stop supplying the power to
the port based on the order of the priority Low
Normal
High in case
total power required by all PDs linked to the switch excesses the power
limit. As the ports have the same priority, then the switch will cease the
power supplement from the port with the highest port id (12
1).
Allocation (W):
The power is consumed by the port.
Detection:
The Detection represents the PoE capacitor detection for the port.
Legacy :
Legacy capacitive detection only
4-point :
IEEE 802.3af 4-point detection only
Both :
IEEE 802.3af 4-point detection followed by Legacy detection
Delay time:
The Delay time is using for set the time period for PD PoE enable time
delay period. It is a solution to avoid rush current to cause shorter PD.
The available time period is from 0 to 300 seconds and 0 means
disable the function
Reset Port:
To reset the port PoE configuration and status.
