Publication date: Mar. 2016
33600 Rev B
iii
Caution
Circuit devices are sensitive to static electricity, which can damage their delicate
electronics. Dry weather conditions or walking across a carpeted floor may cause
you to acquire a static electrical charge.
To protect your device, always:
•
Touch the metal chassis of your computer to ground the static electrical charge
before you pick up the circuit device.
•
Pick up the device by holding it on the left and right edges only.
•
If you need using outdoor device connect to this device with cable then you
need to addition an arrester on the cable between outdoor device and this
device.
Figure 1
Addition an arrester between outdoor device and this switch
Electronic Emission Notices
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a class A
computing device pursuant to Subpart J of part 15 of FCC Rules, which are
designed to provide reasonable protection against such interference when operated
in a commercial environment.
European Community (CE) Electromagnetic Compatibility Directive
This equipment has been tested and found to comply with the protection
requirements of European Emission Standard
EN55022/EN61000-3
and the
Generic European Immunity Standard EN55024. EMC:
Warning:
•
Self-demolition of Product is strictly prohibited. Damage caused by self-
demolition will be charged for repairing fees.
•
Do not place product at outdoor or sandstorm.
•
Before installation, please make sure input power supply and product
specifications are compatible to each other.
EN55022(2003)/CISPR-2( 2002)
class A
IEC61000-4-2 (2001)
4K V CD, 8KV, AD
IEC61000-4-3( 2002)
3V/m
IEC61000-4-4(2001)
1KV – (power line), 0.5KV – (signal line)
