SISTP10xx-141-LR(T) Industrial PoE Switch
Transition Networks
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
13
Connecting power to the Industrial PoE Switch, continued
Note:
The terminal block can accept 12 – 24 AWG wire for power and alarm relay inputs.
Terminal-block
wiring
To wire the 6-position terminal block for redundant power, do the following:
Note:
The 6-position terminal-block plug is constructed
(keyed)
to mate with the Industrial
PoE Switch terminal block. When wiring the plug for power, use the polarity markings
next to the terminal block and on top of the plug to ensure proper connection.
Step
Action
1.
Turn the external power source OFF.
2.
Strip the power wires as required.
3.
Insert one stripped power wire into the terminal block plug. Observe polarity.
See Figure 9.
4.
Secure the wire using a flathead screwdriver by tightening the contact screw.
See Figure 9.
5.
Repeat Steps 3 and 4 until all wires are installed and secured.
Figure 9: 6-Position Terminal-Block
(Primary/Redundant Power Wiring)
Continued on next page
Summary of Contents for SISTP10xx-141-LR
Page 2: ......
