Transition Networks
SISTP1040-382B-LRT Install Guide
33806 Rev. B
Page 12 of 39
Check the port status by reading the LED behaviors using the table below.
Table 3: Port Status LEDs
LED
Color
State
Description
RJ45 Ports
(Left side)
Green
On
The port is enabled and established a link to connected device, and the
connection speed is 1000Mbps.
Green
Blinking
The port is transmitting/receiving packets, and the connection speed is
1000Mbps.
Amber On
The port is enabled and established a link to connected device, and the
connection speed is 10/100Mbps.
Amber Blinking
The port is transmitting/receiving packets, and the connection speed is
10/100Mbps.
---
Off
The port has no active network cable connected, or it has not established a link
to a connected device. Or, the port may have been disabled via the switch user
interface.
RJ45 Ports
(Left side)
Green
On
The port is enabled and supplying power to connected device.
Green
Blinking An abnormal state, such as overload status, has been detected in the switch.
Amber Off
The port has no active network cable connected, or it is not connected to a PoE
PD device. Or, the port may have been disabled via the switch user interface.
SFP Ports
Green
On
The port is enabled and has established a link to connected device, and the
connection speed is 1000Mbps.
Green
Blinking
The port is transmitting/receiving packets and the connection speed is
1000Mbps.
Amber On
The port is enabled and established a link to connected device, and the
connection speed is 100Mbps.
Amber Blinking
The port is transmitting/receiving packets, and the connection speed is
100Mbps.
---
Off
The port has no active network cable connected, or has not established a link to
connected device. Or, the port may have been disabled via the switch user
interface.
