background image

Transition Networks 

 

SISTP1040-382B-LRT Install Guide 

33806 Rev. B 

                             

https://www.transition.com

   

Page  35  of  39 

Warranty 

Transition Networks offers a lifetime warranty on most of our products. We value your satisfaction and aim to 
support your needs. Outlined below are our warranty policies.

 

Five-Year Limited Hardware Warranty 

Transition Networks warrants to the original consumer or purchaser that each of its products and all components 
thereof, will be free from defects in material and/or workmanship for a period of five years from the original 
factory shipment date. Any warranty hereunder is extended to the original consumer or purchaser and is not 
assignable. Transition Networks makes no express or implied warranties including, but not limited to, any implied 
warranty of merchantability or fitness for a particular purpose, except as expressly set forth in this warranty. In no 
event shall Transition Networks be liable for incidental or consequential damages, costs, or expenses arising out 
of or in connection with the performance of the product delivered hereunder. Transition Networks will in no case 
cover damages arising out of the product being used in a negligent fashion or manner.

 

This warranty does not cover damage from accident, acts of God, neglect, contamination, misuse or abnormal 
conditions of operation or handling, including over-voltage failures caused by use outside of the product’s 
specified rating, or normal wear and tear of mechanical components.

 

Transition Networks will, at its option:

 

•Repair the defective product to functional specification at no charge

 

•Replace the product with an equivalent functional product

 

•Refund a portion of purchase price based on a depreciated value

 

To return a defective product for warranty coverage, contact Transition Networks’ Customer Support for a return 
authorization number.

 

Send the defective product postage and insurance prepaid to the following address:

 

  Transition Networks, Inc.

 

  10900 Red Circle Drive

 

  Minnetonka, MN 55343

 

  USA

 

Attn: RETURNS DEPT: CRA/RMA # ___________

 

Failure to properly protect the product during shipping may void this warranty. The return authorization number 
must be written on the outside of the carton to ensure its acceptance. We cannot accept delivery of any 
equipment that is sent to us without a CRA or RMA number.

 

CRA’s are valid for 60 days from the date of issuance. An invoice will be generated for payment on any unit(s) not 
returned within 60 days.

 

Upon completion of a demo/ evaluation test period, units must be returned or purchased within 30 days. An 
invoice will be generated for payment on any unit(s) not returned within 30 days after the demo/ evaluation 
period has expired.

 

The customer must pay for the non-compliant product(s) return transportation costs to Transition Networks for 

Summary of Contents for SISTP1040-382B-LRT








































Reviews: