Transition Networks
SISTP1040-382B-LRT Install Guide
33806 Rev. B
Page 17 of 39
Mounting the Switch on a DIN Rail
1.
Attach the DIN Rail mounting kit to rear panel of the chassis. Insert screws and tighten with a screwdriver
to secure the kit.
Figure: Attach DIN Rail Kit to the Switch
2.
Insert the upper lip of the DIN rail into the DIN-rail mounting kit and press the switch towards the DIN rail
until it snaps into place.
Figure: Insert switch to the DIN Rail
3.
Make sure that the switch is attached securely to DIN Rail.
