57
feet). Gigabit port should use Cat-5 or cat-5e cable for 1000Mbps connections.
The length does not exceed 100 meters.
Improper Network Topologies
It is important to make sure that you have a valid network topology. Common
topology faults include excessive cable length and too many repeaters (hubs)
between end nodes. In addition, you should make sure that your network topology
contains no data path loops. Between any two end nodes, there should be only
one active cabling path at any time. Data path loops will cause broadcast storms
that will severely impact your network performance.
Diagnosing LED Indicators
The Switch can be easily monitored through panel indicators, which describes
common problems you may encounter and where you can find possible solutions,
to assist in identifying problems.
If the power indicator does not light on when the power cord is plugged in, you
may have a problem with power outlet, or power cord. However, if the switch
powers off after running for a while check for loose power connections, power
losses or surges at power outlet. If you still cannot resolve the problem, contact
your local dealer for assistance.
Summary of Contents for MIL-SEM24T4GPA
Page 32: ...32 LACP Status interface...
Page 48: ...48 802 1X Configuration interface...
Page 55: ...55 Logout interface...
