35
Path Cost:
The cost of the path to the other bridge from this transmitting
bridge at the specified port. Enter a number 1 through 200000000
And then, click Apply to apply the configuration
Or, click Refresh to reset the configuration before applying
Spanning Tree Status
Click Refresh to get the newest configuration information. Also, the RSTP
VLAN Bridge information will display as below:
VLAN ID:
Displays
the number of VLAN group ID.
Bridge ID:
Displays the ID produced by the algorithm of MAC address and
priority that is used in the STP/RSTP structure.
Hello Time:
Displays the period of time in seconds that how often the switch
broadcasts hello messages to other switches.
Max Age:
Displays the number of seconds which determines the amount of
time that protocol information received on a port stored by the switch.
Fwd Delay:
Displays the number of seconds which determines how long
each of the listening and learning states will last before the port begins
forwarding.
Topology:
Displays the status of the topology.
Root ID:
Displays the ID of the root.
RSTP - Port Configuration
1.
Port/Group:
Displays the port number and its group number.
2.
Vlan Id:
Displays the Vlan ID of the port.
3.
Path Cost:
The cost of the path to the other bridge from this transmitting
bridge at the specified port.
4.
Edge port:
The port directly connected to end stations cannot create bridging
loop in the network.
Summary of Contents for MIL-SEM24T4GPA
Page 32: ...32 LACP Status interface...
Page 48: ...48 802 1X Configuration interface...
Page 55: ...55 Logout interface...
