38
SNMP Setting interface
SNMP enabled:
Mark the check box to enable SNMP.
SNMP Contact:
Displays System contact.
SNMP Location:
Displays System location.
SNMP Trap destination:
Assign the IP address of the destination for
receiving the SNMP trap.
SNMP Read Community:
Read only community string. Enables requests
accompanied by this string to display MIB-object information.
SNMP Write Community:
Read/Write. Enables requests accompanied by
this string to display MIB-object information and to set MIB objects.
SNMP Trap Community:
Enables requests accompanied by this string to
receive SNMP trap.
QoS Configuration
In this segment, you can configure QoS policy setting, QoS DSCP setting, priority
queue service and QoS Vlan tag.
Mode:
Select the QoS mode – port, DSCP, or vlan tag.
Summary of Contents for MIL-SEM24T4GPA
Page 32: ...32 LACP Status interface...
Page 48: ...48 802 1X Configuration interface...
Page 55: ...55 Logout interface...
