40
IP packet is received, the system will check the TOS level value in the IP
packet that has received. For example, user set the TOS level 25 is high.
The port 1 is following the TOS priority policy. When the packet received
by port 1, the system will check the TOS value of the received IP packet.
If the TOS value of received IP packet is 25 (priority = high), and then the
packet priority will have highest priority
Priority:
Select the priority level – high, medium, low, or normal
And then, click Apply to apply the configuration
Or, Click Refesh to reset the configuration before applying
QoS DSCP Mapping interface
Priority Queue Service
Change to Priority Queue Service tab:
You can choose the means for priority queue. There are two radio buttons in each
port column—
All High Before Low
&
Weighted Round Robin/WRR
.
When
All
High Before Low
is selected, the low priority queues will be served before all of
Summary of Contents for MIL-SEM24T4GPA
Page 32: ...32 LACP Status interface...
Page 48: ...48 802 1X Configuration interface...
Page 55: ...55 Logout interface...
