Transcend TS-AWE3 User Manual Download Page 61

Page: 61 / 62

BIOS UPGRADE

CHAPTER 5 BIOS UPGRADE

Caution!

Only users familiar with the upgrade procedure are recommended to update the BIOS

of the motherboard and only when there is a need to do so. Please note that you have

to download and install the right file on your motherboard. Otherwise, you might cause

some serious system malfunctions.

5.1 How to Check Your BIOS File Name and Version

Please turn on PC first, the screen will display as follows (For example):

TRANSCEND MODULAR BIOS : AWE3-Ver.1.01.

5.2 How to Download the Correct BIOS File from the Web

Please enter the Transcend website on: http://www.transcendusa.com/

On the front page, click on the”Motherboard” icon, which is the second one down: on the

Motherboard page, click on the “BIOS” icon near the top. The BIOS page contains important

information: please take time to read it carefully. Then go to the bottom of the BIOS page, click on

“Slot 1” and choose your motherboard model.

Your BIOS file name must absolutely match the one shown on our web site. Then download the

suitable version to your disk.

You can see the BIOS description on the third line.

BIOS Version 1.01

BIOS File Name

AWE3 - Ver.1.01.

( You can upgrade to a newer version if your BIOS version is older
than this version.)

(Make sure the first 5 charactors are exactly the same as your own
version, otherwise you shouldn't try to upgrade your BIOS.)

Summary of Contents for TS-AWE3































































Search results

Summary of Contents for TS-AWE3

Reviews:

Related manuals for TS-AWE3

Brands by name

Popular brands

Transcend TS-AWE3, User Manual

Search results

Summary of Contents for TS-AWE3

Reviews:

Related manuals for TS-AWE3

Brands by name

Popular brands