HARDWARE INSTALLATION
11
2.7 Floppy Disk Drive Connector (34-pin FDC)
This connector supports the floppy disk drive ribbon cable which is one of the items in your
motherboard package. After connecting the single end to the board, connect the two plugs at the
other end to the floppy drives. Remember, as in the last section, the red stripe on the edge of the
ribbon cable must be the nearest to PIN 1, otherwise your connection won’t work. This means it
must be on the left as the motherboard is shown below.
Floppy Disk Drive Connector
PIN1
Floppy Connector
FDC
Transcend
