•
SDRAM CAS Latency Time
This controls the SDRAM performance: default is 3 clocks. If your SDRAM DIMM specification
is 2 CAS latency, change “3” to “2” for better performance.
•
SDRAM Cycle Time Tras / Trc
Select the number of SDRAM clocks used per access cycle.
•
SDRAM RAS-to-CAS Delay
This controls the latency between SDRAM active command and the read/write command.
Leave it on the default setting.
•
SDRAM RAS Precharge Time
This controls the idle clocks after issuing a precharge command to SDRAM. Leave it on the
default setting.
•
System BIOS Cacheable
Selecting “Enabled” allows caching of the system BIOS. This action can increase system
performance.
32
BIOS SETUP
3.5 Advanced Chipset Features
This option will change the values of the chipset registers and the system setting will alter. Do
not change any values if you are unfamiliar with the chipset.
