BIOS SETUP
35
•
•
•
•
•
IDE Primary/Secondary Master/Slave UDMA
Ultra DMA/33(66) implementation is possible only if your IDE hard drive can support it, and
if the operating environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE
bus master driver). If both your hard disk drive and your system software can support Ultra
DMA/33(66), select “Auto” to enable BIOS support.
•
•
•
•
•
USB Controller
Select “Enabled” if your system contains a Universal Serial Bus (USB) controller and USB
peripheral(s).
•
•
•
•
•
USB Keyboard Support
Select “Enabled” if you use a USB Keyboard.
•
Init Display First
This item allows you to decide whether to activate either the PCI Slot or the AGP first.
•
AC97 Audio / MODEM
If you select “Enabled”, BIOS will detect whether you are using any Audio / MODEM
devices. When an Audio / MODEM device is detected, the onboard Audio / MODEM controller
will be enabled. If you want to use your own Audio / MODEM card, set these fields to
“Disabled”. If not, set these fields “Enabled”.
•
•
•
•
•
IDE HDD Block Mode
Block Mode is also called Block Transfer, Multiple Commands, or Multiple Sector Read/
Write. If your IDE hard drive supports Block Mode (most new drives do), select “Enabled”
for automatic detection of the optimal number of Block Read / Write per sector the drive can
support.
•
•
•
•
•
Power On Function
- Password : Power On only if you key in correct password.
- Hot Key : You can use the hot key to Power On the system.
- Mouse Left : Power On with the Mouse Left Button.
- Mouse Right : Power On with the Mouse Right Button.
