36
BIOS SETUP
- Any Key : Press any key to Power On the system.
- Button only : Power On only by pushing the button on the case (Default).
- Keyboard 98 : You can Power On system by pushing the [Power-On] key of Keyboard 98.
•
•
•
•
•
KB Power On Password
Enter the Power On Passward here. Activated only when “Password” item is selected
in the Power On Function Menu.
NOTE: If you want to use this function, please make sure that the “KB-AWK” jumper
is set to “Enabled”.
•
•
•
•
•
Hot Key Power On
Choose [CTRL] +[ F1] ~ [F12] as a hot key to Power On the system. Activated only when
“Hot Key” is selected on the Power On Function Menu.
•
•
•
•
•
Onboard FDC Controller
You can use this function to enable or disable the onboard FDC controller.
•
•
•
•
•
Onboard Serial Port 1 / Port 2
Select an address and the corresponding interrupt for each of the first and second serial
ports. The Choices: “Disabled”, “3F8/IRQ4”, “2F8/IRQ3”, “3E8/IRQ4”, “2F8/IRQ3”, and “Auto”.
The second serial port shares the resources (address and IRQ) with IrDA.
•
•
•
•
•
UART Mode Select
Choose the right type of infrared device:
- Normal : Normal operation
- IrDA : IrDA compliant serial infrared port
- ASKIR : Amplitude Shift Keyed Infrared Port
•
•
•
•
•
RxD, TxD Active
Consult your IR peripheral documentation to select the combination of RxD and TxD.
•
•
•
•
•
IR Transmission Delay
Consult your IR peripheral documentation to select “Enabled” or “Disabled” of the IR
Transmission Delay.
•
•
•
•
•
Onboard Parallel Port
Select a logical LPT port name and matching address for the physical parallel (printer) port.
The choices: “378/IRQ7”, “278/IRQ5”, “3BC/IRQ7” and “Disabled”.
