4
4. Do not place the scale in an area prone to exposure to direct sunlight, wind, or dust.
5. Do not place the scale in an area with vibrating equipment.
Step 2. Install the AC Adapter.
1. After placing the scale in its area of use, locate the Model A41408 AC Adapter.
2. Connect the female end of the AC Adapter to the connector on the rear of scale, and then
plug the adapter into an AC outlet.
Step 3. Turn the scale’s AC power on to begin the initialization.
Step 4. Initialization - The first time the scale is turned on you will be required to enter your origin ZIP
Code.
1. When the AC power switch is placed “ON” position, the scale prompts for your “origin ZIP
Code”.
2. Enter the first three digits of the ZIP Code from which all items will be mailed. There is no
need to press the ENT key
BASICS OF OPERATION
DISPLAY
The display is an LCD (Liquid Crystal Display) display capable of displaying the various system
messages and information.
FIGURE 3: SPS-70DL Display Detail
As shown in Figure 3, the scale displays the class of mail, weight, shipping charge (rate) and (if
applicable) destination zone or country. The display also contains up to four soft keys which are
covered in the next section.
Whenever additional information is needed, the scale will automatically prompt for the informa-
tion.
PRI
2 lb 1.8 oz
Zn: 8
$11.95
Certified
COD
Regstd
Ret Rcpt
