TransAct RESPONDER MP2, Quick Start Manual

Page: 18 / 39

100-13809 - Rev B
Page - 10 -
Environmental Conditions
Be aware that the environmental conditions of the location where you place the printer
will have an effect on the printer’s performance and longevity. The Responder MP2
TM
printer will run its best when stored and operated in an environment that meets the
temperature and environmental conditions described below.
Temperature:
Typical Operating:
+-10°C to +50°C (14°F to 122°F)
Storage & Shipping: -40°C to +60°C (-40°F to +140°F)
Vibration:
EN 1789:2007 Medical vehicles and their equipment; Road Ambulances
- Section 6.3.4 Mechanical Strength
- Section 6.3.5 Fixation of Devices
Electrical Specifications
Input Power: From 12 VDC to 28 VDC – or optional battery pack
- 5 amps maximum while printing
- 20 mA maximum standby
Media Specifications
8.5-inch wide paper roll (30 meters long), adjustable for A4
USB Interface
The USB interface is a Version 2.0 host interface with a standard Series "A"
receptacle as defined in the USB Specification.
The standard USB Type A connector has the following pin functions:
Pin Signal
1 Vbus (+5 V dc power for external devices @ 500mA)
2 Minus data
3 Plus data
4 Ground
Note: The standard USB interface can provide power to charge the optional battery
but it does not have sufficient power to run the printer.
Regulatory Compliance
CE and e-mark for EU markets
FCC Part 15, Class A
ICES-003 ISSUE 5
UL/EN 60950-1/A2:2013
CAN CSA C22.2 60950-1/R:2011-12