TransAct BANKjet 1500, Operator'S Manual

Page: 57 / 74

2 2 2 2
Revision E
? % . ? % . ? % . ? % .
!TransAct highly recommends that any attempt at configuring the BANKjet 1500 be made by a certified
service technician who has successfully completed training on the printer. TransAct is not responsible for
printer’s that are configured by anyone other than a trained technician!
0 % &
Included in the box your printer shipped in is a configuration summary receipt that shows how the printer was
configured before it left TransAct. This configuration summary receipt can be found in the paper roll compartment
of the printer.
Use the configuration summary receipt to compare printer configuration settings to your system requirements.
Specific attention should be given to ensure that the emulation and the communications link are properly configured.
If they are wrong, the printer may appear inoperative.
, . % & &
If you are experiencing inconistent printing operation, or if the printer appears to be nonresponsive several of the
system requirements need to be confirmed in how the BANKjet has been configured.
Parallel Printer
Emulation
Carriage Return Options
Serial Printer
Emulation
RS-232 Serial Interface (baud rate)
Carriage Return Options
TransAct recommends that ONLY THE ABOVE SETTINGS BE ALTERED and does not recommend that these
re-configurations be made by anybody but a trained service technician who has successfully completed training on
the BANKjet 1500. Please remember that these settings are only a few of the possible configurable options. If you
continue to experience incompatibility issues after changing these settings to match your system, contact TransAct’s
Technical Support Department for assistance.
If the configuration is not correct, Refer to “Understanding Configuration Mode”, on page 32 for information on
adjusting your BANKjet’s settings to meet your system requirements. If there are a number of printers to be
installed and you want the identical configuration in each, you can use a remote configuration program to record the
configuration on one printer, and replicate it over a group. To obtain more information, or the latest version of the
configuration program, call our Sales Department or visit our web site.