16
BAS-SVN208G-EN
Step 14: Mounting the Display
Figure 14.
Resolve graphic
• Alternatively, in the graphic HTML file, check that the template flag is set to false. If
it is set to true, return to the Resolve Graphic utility.
Step 14: Mounting the Display
Note:
The Display is designed for conditioned indoor environments only.
Note:
The display can be connected to System Controller:
•
Directly by Ethernet cable
•
By the optional Wi-Fi router
•
On the customer network with the System Controller
Important:
If using the Trane Wi-Fi router, the Tracer 10-inch Display must be powered
up after the System Controller and router to ensure the router uses the correct default
addresses for System Controller and the display. Alternatively, the display may be
hardwired to the System Controller.
The Display mounts to the wall using a VESA mount. The required VESA mounting
bracket size is 75 mm x 75 mm. A VESA mount (Order Number X05010511010) is available
as an accessory from Trane, but any standard VESA mount should be acceptable. Brand,
tilt, swivel and any other features are acceptable.
1. Select the wall space to mount the display. Mounting constraints are as follows:
• The display must be powered continuously so mount it near an electrical outlet.
• The display communicates to the System Controller using either Wi-Fi or Ethernet
cable connection. Use standard Wi-Fi guidelines to select the display location.
• The display should be accessible for any users that are allowed to make
adjustments using the Display.
2. Disassemble the VESA mount.
3. Install the wall section onto the wall.
4. Install the display section of the VESA mount onto the Display enclosure using the
4 screws included with the VESA mount.
5. Re-assemble the VESA mount so the Display is now on the wall.
