BAS-SVN208G-EN
19
Step 16: Display Setup
Note:
Wi-Fi must be disabled to use a wired Ethernet connection between the Tracer 10-
inch Display and System Controller.
5. To exit the Device Settings screen, use the Back button located on th back of the
display near the power button to return to the Connections tab.
6. Enter the
IP Address
of System Controller. It defaults to System Controller Port 2.
7. Enter the
User Name
and
Password
of the System Controller user you previously
setup. Hostname may be used in place of the IP address. However, it must be a fully
qualified hostname.
8. Click
Connect
.
Note:
Do not add a port in the IP address field. Tracer Concierge will attempt a secure
connection (via https) first. If not available, it will establish a standard connection (http).
9. Select the
Zones
tab.
Figure 17.
Zones tab
10.Set the zone order by dragging areas and spaces into selected positions. To hide a
zone from the display, drag it to the bottom row.If an area is controlling the space
setpoint via a global referencer, place the area in the upper row and the space in the
bottom row to hide it.
11.Select the
Options
tab.
12.If desired, enable
Admin PIN Support
. Admin PIN requires users to enter the Admin
PIN to view or modify System Controller connection settings, Zone configuration,
display options, and contact information.
13.PIN support prevents non-authorized users (new employees or the general public)
from changing a setting on the Tracer 10-inch Display.
