background image

Page  11

Base Limited Warranty

Packaged Air Conditioner and Packaged Heat Pump

TCK, TCH, WCK, WCH (Parts Only)

Models Less Than 20 Tons for Residential Use*

This limited warranty is provided by the manufacturer to the original purchaser and to any succeeding owner of the real property to
which the Packaged Air Conditioner or Packaged Heat Pump (packaged unit) is originally affixed, and applies to products
purchased and retained for use within the U.S.A. and Canada.

Beginning on January 1, 2010, R-22 refrigerant will no longer be used as a manufacturer-installed refrigerant as required by
federal regulation. Following this date, depending on the availability of any remaining R-22 equipment, packaged unit model
replacements may require that the entire system be R-410A compatible. Packaged units and possibly connecting line sets would
need to be replaced in order to be compatible with R-410A refrigerant. Expenses associated with replacing system components
that are not R-410A compatible will not be covered by the terms and conditions of the limited warranty.

The limited warranty period begins when installation is complete and the packaged unit start-up procedure has been properly
completed, verified by installer’s invoice or similar document. If installation completion and start-up date cannot be verified by
installer’s invoice or similar document, this limited warranty coverage begins six (6) months after the date of manufacture based on
the packaged unit serial number.

If the sealed motor compressor fails or the outdoor coil becomes defective, or any functional part of your packaged unit fails
because of manufacturing defect, within

 

five (5) years from the date the limited warranty period begins, Warrantor will furnish

without charge the required replacement compressor, coil, or functional part. Any other costs, such as local transportation, related
service labor, diagnosis calls, refrigerant and related items are not included.

This limited warranty does not apply if the packaged unit was purchased direct (i.e. from internet websites or auctions) on an
uninstalled basis. Additionally, this limited warranty will not apply unless the packaged unit is: (1) installed by a licensed or
qualified HVAC technician, (2) applied and installed in accordance with the manufacturer’s recommendations and its Installer’s
guide and (3) in compliance with all industry standards, national, state and local codes.

This limited warranty does not cover failure of your packaged unit if it is damaged while in your possession; including, but not
limited to (1) damage caused by unreasonable use, (2) damage from failure to properly maintain as set forth in the Use and Care
manual or Installer’s Guide, (3) damage that is not considered a manufacturing defect, such as acts of God, malfunctions or failures
resulting from fire, water, storms, lightning, earthquake, theft, riot, misuse, abuse, increased utility usage costs, or (4) performance
problems due to improper selection/equipment match, installation or application.

This limited warranty applies to product installed on or after 5/1/2009.

THE LIMITED WARRANTY AND LIABILITY SET FORTH HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES AND LIABILITIES,
WHETHER IN CONTRACT OR IN NEGLIGENCE, EXPRESS OR IMPLIED, IN LAW OR IN FACT, INCLUDING BUT NOT
SPECIFICALLY LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR USE, AND IN
NO EVENT SHALL WARRANTOR BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Some states and provinces do not allow limitations on how long an implied limited warranty lasts or do not allow the exclusion or
limitation of incidental or conse-quential damages, so the above limitation or exclusion may not apply to you. This limited warranty
gives you specific legal rights, and you may also have other rights which vary by jurisdiction.

Parts will be provided by our factory organization through an authorized service organization in your area listed in the yellow
pages.

If you wish further help or information concerning this limited warranty, contact:

Residential Systems
6200 Troup Highway, Tyler, TX 75707
Attention: Customer Relations

TW-1048-1409

* This limited warranty is for residential usage of this equipment and not applicable when this equipment is used for a commercial
application.
A commercial use is any application where the end purchaser uses the product for other than personal, family or household
purposes.

Summary of Contents for TCH024C1













Reviews: