SRV-SVX04C-EN
7
Installation
WARNING
Hazardous Voltage!
Failure to disconnect power before servicing could
result in death or serious injury.
Disconnect all electric power, including remote
disconnects before servicing. Follow proper lockout/
tagout procedures to ensure the power can not be
inadvertently energized. Verify that no power is present
with a voltmeter.
1. Confirm unit is level.
2. Verify air inlet and outlet are clear of any debris or
obstructions.
NOTICE
Proper Airflow!
Failure to follow the instructions below could result in
equipment damage.
The reactivation air from the unit could be in excess of
180°F. Do not position unit where reactivation outlet air
could come into contact with sensitive materials and
cause equipment and property damage.
3. Connect power cable from unit to the power source and
confirm wires are properly phased, connected, and locked
securely to panel.
a. For ducted applications, install the supply and return air
ducts on the duct adapters (front of the unit). Ensure
duct is straight.
b. For free blow applications, no duct installation is
required.
Start-up Guidelines
1. Verify that the unit disconnect is in the
OFF
position on the
unit.
2. Energize the source power to the DHU.
3. Switch the unit disconnect
ON
to supply power to the unit.
Figure 2.
Main unit disconnect
4. Refer to
“Installation - Controls,” p. 9
5. Close all covers (local and remote panels) and secure.
Summary of Contents for SRV-SVX04C-EN
