RT-SVX36G-EN
61
Installation
Flue Assembly Installation
1.
Locate the flue assembly and the extension (refer to
for extension usage) in the ship
with section of the unit.
2. Install the flue extension onto the flue assembly as shown in
3. Slide the pipe clamp onto the heater flue tube located inside the heater compartment.
4. Insert the tube on the flue assembly into the hole located in the vertical support for the heat
section.
5. Butt both flue tube sections together and center the pipe clamp over joint.
6. Using the pre-punch holes in the flue assembly, extension, and the vertical support, install the
appropriate number of mounting brackets. Refer to
for details.
Figure 27. Modulating 500 - 1000 MBH
Burner Nozzle
Burner Nozzle
Pilot Shutoff Valve
Pilot Shutoff Valve
Pilot Solenoid Valve
Pilot Solenoid Valve
Pilot Regulator Valve
Pilot Regulator Valve
Pilot Shutoff Valve
Pilot Shutoff Valve
Modulating Gas Valve
Modulating Gas Valve
Shutoff Valve
Shutoff Valve
