18/115
V07-19.0
-
In addition to the actions mentioned here, the instructions according to
chapter
have to be observed.
-
Parts of the AHU may only be lifted with lugs individually - never bolt parts to-
gether before lifting.
-
Lateral load on lifting lugs is not allowed.
3.3.1
Weight specifications of CCE Compact AHUs and additional parts
Depending on the AHU type, the AHU or additional sections have following weights, see
The delivered crane lugs may be used for lifting CCE Compact AHUs which have these maximum
weights. It is required, that the weight is equally distributed on all 4 correctly mounted crane lugs. If
there are more than one AHU part, they must be lifted separately.
type 45
weight in kg
type 55
weight in kg
type 65
weight in kg
basic AHU with plate heat exchanger
380
480
660
basic AHU with heat wheel
355
465
650
optional chiller (additional part)
80
100
120
optional E-heating coil (additional part)
115
140
155
Table 1:
Weight specifications CCE Compact basic AHUs and additional parts
3.3.2
Mounting of crane lugs
4 crane lugs are supplied in two versions – mirror inverted. These lugs must be mounted at the spe-
cific positions at the base frame of the AHU.
Execution of the lifting lugs (see
1. Right-side type
2. Left-side type
Attention to correct mounting of the crane lug according
Figure 6:
Right-side and left-side crane lifting lug
