6
BAS-SVX10F-EN
General Information
This section provides a description of the wired temperature sensors, as well as part numbers and
dimensions.
Product Description
Note:
The information in this manual applies to both factory and field installed versions of Trane
wired temperature sensors.
Trane
®
wired temperature sensors are compatible with any Trane unit controller that uses a
standard 10 kW temperature input. Temperature monitoring is standard on all models. Additional
features are available on some models:
•
Fan control
•
System control
•
Dual or single temperature setpoint control
•
Occupancy (timed override) request function
•
COMM module—Optional accessory that provides an RJ22 connection for a Trane service tool
for system communication. Must be ordered separately.
•
Hot/cold setpoint thumb wheel—Optional accessory allows selecting a temperature setpoint by
color (red/blue for hot/cold) on thumbwheel, rather than by a number. Must be ordered
separately.
The display sensor (p/n X13790886) has an LCD display and includes an RJ11 (RJ22 compatible)
connection for a Trane service tool for system communication. The following features on this
sensor are configurable:
•
Temperature units: Fahrenheit (ºF) or Celsius (ºC)
•
Temperature resolution: 1.0, 0.5, or 0.1 degrees
•
Ability to display setpoint only (zone temperature does not display)
•
Single, dual, or no setpoint
•
System settings: auto, off, cool, heat, emergency heat
•
Deadband (heat/cool setpoint offset for dual setpoint systems)
•
Fan settings: high, medium, low, auto, off
•
Occupancy (timed override request) function
•
Lockable settings to protect against unauthorized use
•
Service pin request
Summary of Contents for X1316105702
Page 43: ...2 1 COMM Module J1 2 3 Optional COMM module X1365146702 BAS SVX10F EN 43 Wiring Diagrams...
Page 46: ......
Page 47: ......
