Trane Technologies X1316105702, Installation, Operation And Maintenance Manual

Page: 34 / 48

Table 1. Resistance measurements for zone temperature and setpoints
Zone or setpoint temperature
Nominal zone temperature
output resistance Nominal setpoint and heating
setpoint output resistance
** NA 938 
55°F (12.8°C) 17.47 k  792 
60°F (15.6°C) 15.3 k  695 
65°F (18.3°C) 13.5 k  597 
70°F (21.1°C) 11.9 k  500 
75°F (23.9°C) 10.5 k  403 
80°F (26.7°C 9.3 k  305 
85°F (29.4°C) 8.25 k  208 
* NA 49 
Notes:
1. Sensors are calibrated at 70°F (21.1ºC).
2. Single setpoint systems: Varies ±28

at 70°F (21.1ºC); varies ±128

at endpoints of scale 55ºF (12.8ºC) and 85ºF
(29.4ºC). Dual setpoint systems: Cooling setpoint varies ±10

at 70ºF (21.1ºC); varies at ±110

at endpoints of
scale. Heating setpoint varies ±20

at 70ºF (21.1ºC); varies at ±120

at endpoints of scale.
34 BAS-SVX10F-EN
Maintenance and Troubleshooting
Table 2. Resistance measurements for fan and system modes
Fan mode System mode Nominal output resistance
Auto or invalid Emergency heat 35,000 
Auto or invalid Heat 19,480 
Auto or invalid Auto 7680 
Auto or invalid Off 2320 
Auto or invalid Cool 4870 
On Emergency heat 43,450 
On Heat 27,930 
On Auto 16,130 
On Off 10,770 
On Cool 13,320 
High Invalid (fan control only) 16,130 
Med Invalid (fan control only) 13,320 
Low Invalid (fan control only) 10,770 
Auto Invalid (fan control only) 2320 
Off Invalid (fan control only) 4870 