Trail Tech Voyager Page 5 User Manual Download

Page: 5 / 48

Trail Tech Voyager

• Do not plug Voyager directly into a wall outlet
except with a Trail Tech wall charger.

• Read all instructions before using Voyager.

• Avoid contact with gasoline, degreasers or
other chemical cleaners.

• Do not wash with pressure washer.

• When installing Voyager, disconnect the
vehicle battery.

• When installing radiator hose temperature
sensors, make sure it ﬁts BEFORE cutting the
radiator hose.

PAY ATTENTION TO THE TRAIL!

Precautions

WARNING:

• Check gap between wheel sensor and magnet
periodically.

• Do not bend, twist, kink or abuse the sensor
cables.

• To reduce the risk of damage, do not
disassemble Voyager or its accessories.

• Do not operate Voyager while driving.

• Do not rely on Voyager for operations requiring
absolutely precise measurements of distance
or direction. All GPS devices inherently contain
some amount of error. Use the wheel sensor for
the most precise data.

Precautions

Summary of Contents for Voyager

















































Search results

Summary of Contents for Voyager

Reviews:

Related manuals for Voyager

Brands by name

Popular brands

Trail Tech Voyager, User Manual

Search results

Summary of Contents for Voyager

Reviews:

Related manuals for Voyager

Brands by name

Popular brands