Trail Tech Voyager Page 48 User Manual Download | Manualshive

Page: 48 / 48

background image

LIMITED WARRANTY

Within one year from the date of original purchase, Trail Tech will repair or replace, at its option, any
Trail Tech powersport computer which is deemed defective in workmanship or materials. Please
contact Trail Tech or the dealer where the item was purchased for assistance.

Damage or injuries resulting from negligence or misuse are not covered by this warranty. Incidental
or consequential damages are speciﬁcally excluded.* This warranty gives you speciﬁc legal rights.
You may also have other rights which vary from state to state.

*Because some states do not allow

the exclusion of incidental or consequential damages, this exclusion may not apply to you.

MADE IN AMERICA

Trail Tech and Voyager are trademarks of Trail Tech, Inc.

www.trailtech.net

360-687-4530

C O N F O R M I T É

E U R O P É E N N E

Manual Version 1.0

«
...
46
47
48

Summary of Contents for Voyager

















































Reviews:

No comments

Related manuals for Voyager

Guide+Play GPS-500 WE

Brand: Harman Kardon Pages: 29

Brand: Cloudleaf Pages: 8

Cyclo 500 series

Brand: Mio Pages: 32

Brand: Mictrack Pages: 9

Brand: Salind Pages: 11

Brand: TopflyTech Pages: 16

Brand: Sensitech Pages: 2

Brand: RAK Pages: 22

Brand: Spireon Pages: 12

Brand: Navico Pages: 80

Brand: Garmin Pages: 38

Brand: APM Pages: 5

Brand: Audiovox Pages: 12

BI-868 TREK HW2

Brand: BITREK Pages: 32

Brand: UniGuard Pages: 11

Brand: Morbella Pages: 34

Brand: UniGuard Pages: 6

Brand: SkyBitz Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands