Tractus3D PRO Series Page 6 Installation And User Manual Download | Manualshive

Page: 6 / 62

background image

6

Saf

ety and compliance

1.

Safety and compliance

Always work safe with your Tratus3D printer and follow all warnings and instructions to prevent any possible
personal injuries or accidents.

1.1

Safety Notices

This manual includes warnings and safety notices.

Provides additional information that is helpful to do a task or to avoid problems.

Warns of a situation that may cause material damage or injuries if one does not follow the safety

instructions.

General safety information

The Tractus3D printer has moving parts that will get hot and generate high temperatures. This may cause
injuries. When in operation, never reach inside of the 3Dprinter. Control the 3Dprinter with the touchscreen,
positioned on the front or with the power switch at the front. Let the Tractus3D printer cool down for at least 5
minutes before reaching inside.
Do not leave or store items inside the 3D printer.

Without explicit instructions from Tractus3D, please do not adjust or change anything on the Tractus3D printer.
Persons with reduced physical and/or mental capabilities that are unable them to act accurately in case of
emergency or persons with lack of experience and knowledge, should not use the Tractus3D Printer. Only when
given instructions concerning the use of the appliance, or under supervision by a person responsible for their
safety.

Children should always be under supervision when using the 3D printer.

1.2

Hazards

Electromagnetic compatibility (EMC)

This product has been tested and found to comply with the limits for a digital device Class A, according to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the 3D printer is operated in a commercial environment. This Tractus3D printer generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.

Electrical safety

Every printer has passed testing before shipment. This test guarantees the right level of insulation against
electrical shock. An earthed mains socket must be used. Be sure that the building installation has dedicated

«
...
4
5
6
7
8
...
»

Summary of Contents for PRO Series































































Reviews:

No comments

Related manuals for PRO Series

Brand: YOUPAI Pages: 15

Brand: TallyGenicom Pages: 15

Brand: Oki Pages: 16

Brand: Olivetti Pages: 179

Brand: Olivetti Pages: 36

Brand: Oki Pages: 679

Brand: Oki Pages: 40

Brand: OKIDATA Pages: 308

Brand: OKIDATA Pages: 9

Brand: OKIDATA Pages: 2

Microline 8480 FB

Brand: Oki Pages: 12

Brand: Xerox Pages: 2

DocuPrint 4850 NPS

Brand: Xerox Pages: 68

Brand: Xerox Pages: 28

DocuColor 5000AP

Brand: Xerox Pages: 5

Brand: Xerox Pages: 68

Brand: Xerox Pages: 2

Brand: Xerox Pages: 170

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands