29
Oper
ation
5.2
Heated Chamber
With the Tractus T850P 3d printer there is an option to heat up the build chamber. The air temperature around
the printed model will remain stable throughout the entire print job to help avoid warping. This option can be
set in Simplify3D on the temperature tab. Please note that we have unchecked the box “Wait for temperature
controller to stabilize” which means the print will start, no matter what the chamber temperature is at that point.
The chamber temperature can also be set via the webinterface, or via gcode on the lcd. Please use the following
gcode in the console tab of the lcd:
“M141 S65”
to set the temperature to 65 degrees Celcius.
Currently the active chamber temperature is only displayed on the webinterface. Please keep in mind that when a
file has been cancelled or has finished printing, the chamber heater will deactivate.
