Tractus3D PRO Series Installation And User Manual Download | Manualshive

Page: 48 / 62

background image

48

Maintenance

8.4

Dimensional accuracy calibration

When printing objects that really needs a high accuracy on the dimensions you can compensate it by adding a
line in the start G-Code of your slicing software. By default, there is a compensation done with PLA in the factory.
This setting can be found in the configuration file of the 3D printer.

Every material will need its calibration if you really want to have super high accuracy in your printed dimensions.
Some materials will contract more than others.

In the folder Tractus3D on the machine (if not deleted) you will find a file called:

DimensionCalibration.gcode

Use this file only for PLA on the machine, in combination with a 0.4 nozzle. If you want to calibrate for other
materials use the STL file and slice the file to generate a g-code (don’t rotate the file on the bed in your slicing
software).

If you deleted the folder or need the STL file, please download these from our website or ask our support desk to
send you this file.

Print this file with your selected material.

«
...
46
47
48
49
50
...
»

Summary of Contents for PRO Series































































Reviews:

No comments

Related manuals for PRO Series

870 - SuperScript B/W Laser Printer

Brand: NEC Pages: 52

SuperScript 1800

Brand: NEC Pages: 8

Brand: Star Pages: 82

Brand: Konica Minolta Pages: 15

Brand: Felix printers Pages: 26

Brand: Tally Pages: 266

Brand: Olivetti Pages: 293

VarioPrint 4110

Brand: Oce Pages: 216

Brand: Ricoh Pages: 2

Brand: Riso Pages: 150

1235/DX - Phaser Color Laser Printer

Brand: Xerox Pages: 144

Brand: Epson Pages: 105

Brand: Epson Pages: 128

Brand: Epson Pages: 145

Brand: Epson Pages: 200

Brand: Epson Pages: 2

Brand: WAGO Pages: 52

Brand: Brother Pages: 144

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands