25
Oper
ation
Control your printhead when the printer is idle with these buttons.
Home All
will bring the printer to its starting
position.
Auto Delta Calibration
is used for calibration of the machine
(see chapter 4.3 Calibrating the bed)
NOTE: Please make sure you don’t use these buttons while the printer is printing an object!
Here you can find pre-defined shortcuts or make your own shortcuts (macro’s).
A macro is a sequence of g-code commands which you are using more often.
When you want to extrude manually use this control. The buttons
Retract
and
Extrude
will be only available
when the nozzle (Tool 0) is at temperature for at least 170 degrees Celsius.
For quick loading use the feed rate of 15mm/sec or higher but for extrusion of filament only use 5mm/s or
1mm/s.
