background image

1. DESCRIPTION OF EQUIPMENT

Fig. 1 :  

1. 

Side plates

2. 

Adjustable screw,

 

3. 

Anchor point.

The corso beam clamp is a lifting accessory. It 

has been designed for anchoring a hoist or winch 

to a fixed point on an overhead “I” beam (Fig. 2).
The corso beam clamp is of simple design and 

easy to install. Once fitted correctly, it may be 

used with complete safety.
2. RIGGING ARRANGEMENTS
The beam clamp is anchored to a fixed point on 

the beam (fig.2).
NB : The beam clamp must be appropriate 

for the load to be lifted and consequently the 

capacity of the beam should be calculated by a 

qualified person.
3. INSTALLATION
1.  Unscrew the adjustable screw to open the 

clamp wider than the beam.

2.  Fit the clamp onto the beam. The clamp should 

be held in place without jamming on the beam.

3.  Screw up the adjustable screw until it touches 

the beam. Tighten the screw manually.

4.  Ensure that the clamp is in contact with the 

beam at points A1, A2, B1 and B2. There 

should be no other contact between the clamp 

and the beam (see Fig. 1).

4. ANCHORING
The hoist or winch should be anchored to the 

beam clamp by the anchor point provided.
WARNING : a load, hoist or any other object 

should not be anchored to any component of 

the clamp, other than the anchor point.
5. OPERATION
Corso beam clamps are designed for static 

use. Never attempt to move a beam clamp under 

load. Moving the position of the beam clamps 

should only be carried out by a qualified person.
6.  TAKING OUT OF SERVICE AND  

STORAGE

Before taking a corso out of service, that 

is removing it from the beam to which it is 

 

attached, ensure that there is no load on the 

beam clamp or the trolley, by removing the sling, 

hoist or winch.

Unscrew the adjustable screw until the beam 

clamp is opened sufficiently to be removed from 

the beam.
7. MAINTENANCE
Corso beam clamps should be regularly 

 

cleaned and oiled. 
8.  WARNINGS AGAINST HAZARDOUS  

OPERATION

The use of corso beam clamps, in 

 

accordance with the instructions in this manual, 

is a guarantee of safety. Neverthless, it is useful 

to draw the attention of users to the following 

warnings :
•  

Never use corso beam clamps or trolleys 

 

for lifting people under any  circumstances.

•  

Never use corso units beyond their working 

loadlimit.

•  Never use corso units for applications other than 

those for which they are intended.

•  Never fit a corso unit to a beam by any means 

other than those described in this manual.

•  Never attach loads to parts of corso units other 

than the anchor point provided.

•  Never lift a load which is not aligned with the 

clamp as described in this manual.

•  Never allow a load attached to corso to swing 

or spin.

• Never walk or stand under the suspended load.
9. TROUBLESHOOTING
If the adjustable screw is difficult to turn or is  

blocked, it indicates that the thread has been 

damaged.  In this case, return the beam clamp to 

an approved TRACTEL

®

 repairer.

10. HEALTH AND SAFETY AT WORK
It is the responsability of every company to 

ensure that its employees have been fully and 

properly trained in the safe operation of the 

equipment.

3

Summary of Contents for Corso LT-10B




















Reviews: