TrackWeight BRT 5, Installation Manual

Page: 15 / 31

Installation Manual | V1.0.0 | 15
Trailer end
14. Identify the number of height valves on the trailer.
15. For each system controlled by a valve, an air line must lead to the TrackWeight
communication box.
16. Cut the air line as close as possible to the balloon to insert a BRT 5053 or BRT 5055
"T" fitting
2
(depending on the size of the air line tube).
17. Insert the cut air line and ¼ " BRT 5220 tube into the" T "fitting and lead this tube to
the front of the trailer.
18. Make a 1-in. diameter hole in the mounting wall to insert the BRT 5565 service hand
with valve.
19. Insert the BRT 5051 fitting into the BRT 5565 valve and insert the BRT 5220 tube
into the fitting.
20. Attach valve BRT 5565 and service hand BRT 5556 together.
Note: The air line is closed when the handle of the BRT 5565 valve is perpendicular (as
shown in Step 18, right picture).
2
For a group of 3 axles, insert the "T" on the middle one. For a group of 2 axles, insert the "T" on the
one at the back.
Part to insert only BRT 5051
BRT 5565