SAFETY INFORMATION
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
iii
Repair and Service Manual
699322
SAFETY INFORMATION
This manual has been designed to assist in maintaining the vehicle in accordance with procedures developed by the
manufacturer. Adherence to these procedures and troubleshooting tips will ensure the best possible service from the
product. To reduce the chance of personal injury or property damage, the following must be carefully observed:
Certain replacement parts can be used independently and/or in combination with other
accessories to modify the vehicle to permit the vehicle to operate at or in excess of 20 mph
on public streets or roads. When a vehicle is modified in any way by the Distributor, Dealer or
customer to operate at or in excess of 20mph, UNDER FEDERAL LAW the modified product will be a Low
Speed Vehicle (LSV) subject to the strictures and requirements of Federal Motor Vehicle Safety Standard
571.500. In these instances, pursuant to Federal law the Distributor or Dealer MUST equip the product with
headlights, rear lights, turn signals, seat belts, top, horn and all other modifications for LSV’s mandated in
FMVSS 571.500, and affix a Vehicle Identification Number to the product in accordance with the requirements
of FMVSS 571.565. Pursuant to FMVSS 571.500, and in accordance with the State laws applicable in the
places of sale and use of the product, the Distributor, Dealer or customer modifying the vehicle also will be
the Final Vehicle Manufacturer for the LSV, and required to title or register the vehicle as mandated by State
law.
Information on FMVSS 571.500 can be obtained at Title 49 of the Code of Federal Regulations, section 571.500, or
through the Internet at the website for the U.S. Department of Transportation - at Dockets and Regulation, then to Title 49
of the Code of Federal Regulations (Transportation).
The manufacturer will NOT approve Distributor, Dealer or customer modifications converting the vehicles into LSV’s.
The manufacturer, in addition, recommends that all products sold as personal transportation vehicles BE OPERATED
ONLY BY PERSONS WITH VALID DRIVERS LICENSES, AND IN ACCORDANCE WITH APPLICABLE STATE
REQUIREMENTS. This restriction is important to the SAFE USE AND OPERATION of the product.
GENERAL
Many vehicles are used for a variety of tasks beyond the original intended use of the vehicle; therefore, it is impossible to
anticipate and warn against every possible combination of circumstances that may occur. No warnings can take the place
of good common sense and prudent driving practices.
Good common sense and prudent driving practices do more to prevent accidents and injury than all of the warnings and
instructions combined. The manufacturer strongly suggests that all users and maintenance personnel read this entire
manual paying particular attention to the CAUTIONS and WARNINGS contained therein.
If you have any questions regarding this vehicle, contact your closest representative or write to the address on the back
cover of this publication, Attention: Product Service Department.
The manufacturer reserves the right to make design changes without obligation to make these changes on units previ-
ously sold and the information contained in this manual is subject to change without notice.
The manufacturer is not liable for errors in this manual or for incidental or consequential damages that result from the use
of the material in this manual.
This vehicle conforms to the current applicable standard(s) for safety and performance requirements.
These vehicles are designed and manufactured for off-road use. They do not conform to Federal Motor Vehicle Safety
Standards of the United States of America (USA) and are not equipped for operation on public streets. Some communi-
ties may permit these vehicles to be operated on their streets on a limited basis and in accordance with local ordinances.
Refer to GENERAL SPECIFICATIONS for vehicle seating capacity.
Never modify the vehicle in any way that will alter the weight distribution of the vehicle, decrease its stability or
increase the speed beyond the factory specification. Such modifications can cause serious personal injury or
death.
Modifications that increase the speed and/or weight of the vehicle will extend the stopping distance and may
reduce the stability of the vehicle. Do not make any such modifications or changes. The manufacturer prohibits and dis-
claims responsibility for any such modifications or any other alteration which would adversely affect the safety of the vehi-
cle.