B
WEATHER PROTECTION
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
125
Repair and Service Manual
699322
SPILT WINDSHIELD
Tool List
Qty.
Plastic faced mallet ..................................................... 1
Wrench, 7/16".............................................................. 1
Phillips screwdriver...................................................... 1
1.
Remove protective covering from the windshield (2)
2.
Install sash (3) on each side of the lower section of
windshield. Using a plastic faced mallet, gently tap
sash to ensure windshield seats properly (See Detail
A).
Take care not to warp windshield
when raising and lowering the top
section of windshield.
3.
To secure windshield when lowered, press edge of
windshield firmly into lower latches (See Detail B).
4.
Insert bolt (4) through washer (5), rubber grommet
(6) and existing hole in front strut. Secure with
washer (5)
5.
and lock nut (7) (See Detail B).
Do not over-tighten
or squeeze grommet.
6.
Place bottom section of windshield on rubber grom-
mets and press the sash, starting at the bottom, onto
the front strut so that it snaps into place (See Details
B and C). Repeat for opposite side of windshield.
7.
Swing the top section of windshield up and secure by
hooking the upper round latch (8) on each side of
strut to the upper windshield. Using a plastic faced
mallet, gently tap the latch (8) to ensure windshield
seats properly (See Detail D).
Fig. 1 Split Windshield
SPLIT WINDSHIELD
Strut
Front of Vehicle
Strut
Front of
Vehicle
Windshield
DETAIL A
3
Windshield
Strut
DETAIL C
3
DETAIL D
DETAIL B
8
6
3
2
7
4
5
LOWER LATCH